Highlights
Measuring length equal to 50mm
Accuracy of 1 micron at 20°C
Readings as small as 0.1 µm or even 0.01 µm can be made depending on the counter
RS-232 and printer output are standard features
TC-101 counter
More compact and accurate than previous models
Smallest readable value is 0.01µm
Can be used with old-type digital micrometers and rotary encoders
Superior cost performance
RS-232C output and printer output are standard features
MFC-101 counter
A compact, single shaft counter for exclusive use with the MF-501 and MF-1001 with display
and resolution switching, direction switching, and display unit switching functions.
Can be attached to the head or placed outside.
RS-232C output and printer output are standard features.
Specifications
| Readable travel |
50 mm (2”) |
| Minimum readout value |
0.1 µm (switchable determined by the counter used) |
| Measuring angle |
Useable in down or sideways position |
| Measuring force – variable |
Down 115-165 gf; Lateral 66-125 gf |
| Response speed |
500 m/second or better |
| TC-101 Table-top Counter tech specs |
Inches/mm: Inch or Metric (switchable); Display: 10-segment LED display; Minimum readout: 0.01, 0.05, 0.1, 0.5, 1.0 micron (0.0000005", 0.000002", 0.000005", 0.00002", 0.00005") dip switch on back; Functions: Zero reset button on front, preset, pulse check, zero blanking; RS232: RS232 output (with optional cable); Power: 12 V DC adapter - available in 120 V or 240 V models; Optional: Extension cable 2 m (6 ft) counter to Digimicro head |
| MFC-101 Compact Counter tech specs |
Mounting: Can be mounted directly on the Digimicro; Inches/mm: Inch or Metric (switchable); Display: 7-segment LED display; Minimum readout: 0.1, 0.5, 1.0 ,ocrpm (0.000005", 0.00002", 0.00005") setting by switch on back; Reset: Zero reset button on front; RS232: RS232 output (with optional cable); Power: 12 V DC adapter - available in 120 V or 240 V models |
